100 A

Model 100 A

Nail Dust Extractor

*Attaches to existing plug in and battery operated drills with the Sheath.

Rated #1!

Video (click link to right to see the system in action) images\movie054.mpg

Click picture to enlarge

Learn about the features below by clicking on them -or- scroll down the page
Sheath	Auto-Circuit (Plug In Drills)	AFT (For Battery & Plug In Drills)	Color Choice	Mounting Brackets	Specifications

Click pictures to enlarge

The Jan L Vacuum Sheath

The best means for nail dust collection...provides "Source Point" collection, capturing particles where they are created, and from all aspects of the bur by surrounding the bur with a powerful vacuum...allows total nail view at all times...directly attaches to any handpiece so the dust intake moves with you for peak collection efficiency at all times.

*The Model 100 A can capture dust down to .2 micron, and was rated #1 in an independent comparison for the highest level of consistent collection.

To the right are samples of a few of the drills the sheath attaches to.

The Jan L Auto-Circuit for plug in drills

The easiest means of activating a drill and vacuum system. Simply plug your drill into the 100 A's rear, and the 100 A triggers on/off automatically when you activate your drill switch. No need to bend down or reach over. This unit will also activate/inactivate with a on/off or variable foot control.

100 A with Dremel

The Jan L Model 100 AFT for battery operated drills and plug in drills

Simply attach the air operated foot bulb to the hose port, then depress the foot bulb to turn the extractor on/off. Turn your battery operated drill on/off separately. Adapts to 7.2v Dremel, and 800 Series Battery Drill, MicroCad Battery Drill, and most plug in drills.

The side receptacle also activates/inactivates simultaneously when depressing the foot bulb. Plug in type drills plugged here, will activate/inactivate simultaneously with the vacuum when depressing foot bulb.


Two mounting brackets are available. The wall bracket allows mounting of the Model 100 A to a wall or cabinet. The Pipe Mount Bracket allows mounting to the base of a Mayo Stand of IV Stand.
		The Pipe Mount Bracket is pictured to left. The 100 A is installed on the bracket at the base of the Mayo Stand, and the Supra 35 Electric Drill system and Bur stand are on the tray's top.
Wall Bracket on cabinet	100 A in the Wall Bracket attached to cabinet

Color Choice for Model 100 A

White	Almond	Beige	Blue	Gray
Back To Top

Specifications
Features:	easy adaption to existing drill/handpieces, 6 foot hose, carry handle, comes in white, almond, beige, blue, and gray.
Electrical:	115 vac, 6 amp, 50/60 hz
Weight:	9 pounds
Dimensions:	8 inches at widest point, 12 inches high
Motor:	ball/ball bearing, tow stage, can generate up to 1 hp
Warranty:	one year on motor, 90 days on all other parts