| Carbides - Most Popular | Ruby Burs- Smoothing | KB32913-Hyper Aggessive/Scary | Bur Holder/Storage | Bur Sterilization |
Imitation is the greatest compliment, and many have tried. But none have come close to the quality of
Our carbide burs reduce quickly, creating particles easily captured by the Nail Dust Extractors, they don't clog, but do slough of dust, reducing the applied pressure required and subsequent heat. Because the Burs do the work, your hand and the handpiece last longer. The patient is more comfortable. The nibbling quality of the small teeth make the burs "Cut Safe" when bumped into soft fragile tissue. The resulting finish is allows nylons to be put back on without tearing. Finally, they last for years through all sterilization methods.
We feature the "Everything Bur, and it may be the only bur you require, but other popular ones are represented here.
Carbide burs sell for $25.50 each. Click on the picture to enlarge
For the cost conscious Jan L Company offers the
Ruby burs are very save to use. They leave a very smooth finish on nails, and are excellent on callus.

For those who wish to take no prisoners, the KB32913 is used for "QUICK" nail and callus reduction.
It is very aggressive and requires great control!
Click on picture to enlarge
|
|
| Fast gross reduction of nail and callus,
attention and control are necessary as it is not forgiving $12.50 each |
10088
Round
10088 Round Bur Holder
Holder has 24 holes for 3/32" shank burs and 24 holes for 1/8" shank burs. It measures 2-1/8" in dia. by 2-1/2" high. Holds burs up to 2" long.all Round Bur Holder with clear plastic cover conveniently stores and organizes 48 accessories. .25 |
![]()
Holder has 34 holes for 3/32" shank burs and 18 holes for 1/8" shank burs. It measures 2-1/2" square. Holds burs up to 2" long
|
3. Steam autoclave procedure
3.1 Mechanically remove debris from bur grooves with brush
3.2 Place in ultrtasonic cleaning solution recommended for surgical instruments
3.3 Disinfect with instrument non-corrosive disinfecting cleaning agents (avoid contact with hydrogen peroxide).
3.4 Rinse in mild soap and water.
3.5 Sterilize at 135 degrees C or (270 degrees F) for 15 minutes @ 15 p.s.i. at highest bar (you may increase any of these parameters, but not decrease them).
3.6 Follow autoclave drying time instructions
See Chemclave and Hot Flash sterilization methods by clicking on "Instruction Book" link above