MICRO TORQUE

REGULAR AND  STERILIZABLE

TO SET UP SYSTEM:

1-     PLUG LINE CORD INTO CONTROL BOX

2-     PLUG LINE CORD INTO GFI WALL OUTLET

3-     INSTALL NOSECONE ONTO THE MOTOR BODY AFTER REMOVING THE MOTOR STEM SCREW           

4-     PLUG MOTOR CORD INTO THE CONTROL BOX

5-     PLUG THE FOOT CONTROL INTO CONTROL BOX

6-     SET THE SLIDE SWITCH TO HAND OR FOOT CONTROL

7-     DEPRESS THE GREEN SWITCH TO TURN UNIT ON

8-           A. IF SET TO HAND POSITION VARY THE RPM CONTROL TO DESIRED SPEED

B.      IF SET TO FOOT OPERATION DEPRESS THE FOOT SWITCH AND POSITiON RPM CONTROL TO DESIRED SPEED

TO CHANGE THE BUR:

1-     ROTATE THE TWIST RING TO ITS EXTREME TO RELEASE  AND REMOVE THE INSTALLED MANDREL

2-     INSTALL A BUR

3-     ROTATE THE TWIS RING TO ITS EXTREME IN THE OPPOSITE DIRECTION TO LOCK THE BUR IN PLACE.

TO STERILIZE NOSECONE: 

* FOLLOW DIRECTIONS IN SNAP BOX CONTAINING THE NOSECONE OR SEE INSTRUCTIONS ON MAIN "INSTRUCTION BOOK PAGE".

TO STERILIZE MOTOR (FOR STERILIZABLE MOTOR ONLY--DO NOT STERILIZE VENTED MOTOR. IT WILL BE DESTROYED!!!!)

1-     REMOVE NOSECONE FROM MOTOR

2-     SCREW MOTOR STEM SCREW IN PLACE (WHEN NEW IT IS ALREADY IN POSITION- UNSCREW IT TO INSTALL THE NOSE CONE)

3-     INSTALL INTO AUTOCLAVABLE BAG

4-     AUTOCLAVE

WARRANTY- 6 MONTHS ON CONROL BOX, MOTOR , NOSECONE AND FOOT CONTROL

SERVICE: TO SERVICE, RETURN THE ITEM WITH YOUR NAME, ADDRESS, AND PHONE NUMBER, IN A BOX TO : JAN L CO. INC., 26 MILL ST. , MOUNT HOLLY, NJ 08060. YOU MAY REACH US AT 609 261 1133.